Armor Plate

Armor Plate

Armor plate, also known as armor steel or ballistic steel, is a type of hardened steel that is designed to resist penetration and deformation caused by high-velocity projectiles. It is commonly used in the manufacturing of military vehicles, aircraft, and body armor for law enforcement officers and military personnel. Armor plate is made by heating and quenching steel to increase its hardness and strength. The steel is then subjected to a process called tempering, which involves heating the steel to a lower temperature to reduce its brittleness and increase its toughness. The resulting steel is extremely strong and can withstand the impact of bullets, shrapnel, and other projectiles. Armor plate comes in a variety of thicknesses and grades, depending on the intended use. Thicker plates are typically used for vehicle armor, while thinner plates are used for body armor. The grade of armor plate used also varies depending on the level of protection required. For example, Level III armor plate is designed to stop rifle rounds, while Level IV armor plate is designed to stop armor-piercing rifle rounds. Despite its effectiveness, armor plate is not without its limitations. It is heavy and can be difficult to maneuver, making it less practical for use in certain situations. Additionally, armor plate is not completely bulletproof and can be penetrated by certain types of ammunition.

hardened steel, ballistic steel, military vehicles, body armor, thicknesses

— Eric Smith

CITATION : "Eric Smith. 'Armor Plate.' Design+Encyclopedia. https://design-encyclopedia.com/?E=306798 (Accessed on June 07, 2026)"